The vibrations of a car when accelerating are a symptom of a problem in the vehicle's mechanics that, if not identified and solved in time, could be the cause of a major breakdown. Driving in unsafe conditions and higher fuel consumption are just some of the most immediate consequences of this incident.
To avoid uncomfortable situations behind the wheel, or even an accident, it is vital to check the state of the general mechanics of the vehicle in a workshop you trust. The vibrations are associated with the wear of some elements that affect the optimal performance of the vehicle. The most common causes of these vibrations and what measures can be taken to resolve them are explained below.
Tires and rims are elements exposed to continuous blows due to potholes and potholes. Over time, the wheels can become unbalanced, which causes vibrations as speed increases. In this case, you will have to go to a specialized workshop to perform a balancing.
To prevent this type of problem, it is crucial to respect the useful life of your tires and periodically check their condition in order to always drive within the recommended pressure levels. If a tire shows irregular wear or a rim is deformed, you should replace them immediately to avoid weight differences between the wheels. When changing them, be sure to properly tighten the bolts and nuts and replace any that are bad.
With wheel changes, shops usually check their alignment. A misaligned car will tend to pull to one side, which can cause vibrations when accelerating that make driving more unstable.
A breakdown in the car's engine can lead to problems in the vehicle's transmission and clutch. If you perceive vibrations in the gear lever, the engine mount may have deteriorated. These are studs that join the frame with the vehicle's engine and serve to absorb vibrations from the engine and gearbox. The timely replacement of these elements will prevent a major breakdown, so do not hesitate to go to your workshop at the slightest indication.
Wear or deformation of the brake discs and brake shoes can make acceleration difficult and cause unwanted vibrations or even yaws of the vehicle. They must be recalibrated in a workshop if this is the case.
The vibrations can also be due to problems with the shock absorbers, essential elements for the vehicle's suspension, or the poor condition of the speed joints or homokinetic joints that are part of the car's axles. In case of any suspicion, go to your workshop to obtain a proper diagnosis.
